Choose Language
Shipping Estimate
Region / State:
Post Code:

Coloured Bubble Lined Mailing Bags 10 x 14, 250 x 350 + Lip, Qty 100

Coloured Bubble Lined Mailing Bags 10 x 14, 250 x 350 + Lip, Qty 100
Brand: Poly Postal Packaging Ltd
Product Code: Coloured BL 10 x 14
Unit: 100 Bags

Available Options

* Coloured Bubble Lined Bags:

2 or more @ £19.50 per unit (see above).
5 or more @ £19.00 per unit (see above).
10 or more @ £18.00 per unit (see above).
20 or more @ £17.50 per unit (see above).
30 or more @ £17.00 per unit (see above).

Add to Wish List Add to Compare

Coloured Bubble Lined Mailing Bags 10 x 14, 250 x 350 + Lip, Qty 100

Choose your colour of Bubble Lined Mailing Bags.  Take a note of the comment below the picture which shows the size if required.  Then choose the qty of boxes you would like to order.  There are 100 per box

These bags have been lined with out clear bubble film which gives them better protection.  They are 100% Recyclable and also water resistant.  We manufacture the bubble lined postal bags on site here in the UK, as we do all our mailing bags.  The bubble lined mailing bags are manufactured from our special 3 layer COEX blended polythene film.  The bags are glossy on the outside.  We specially treat the film in the manufacturing process so that the glue on the lip sticks permanently as it should and to ensure that the polythene film accepts stamps and your address labels etc.

The bubble lining has been hand inserted and so can be removed if you wish

The outer box measures 500 X 400 X 300mm

A full pallet qty of these bags would be 3000 bags, 30 boxes of 100 per box

Advice & Usage Guide

Use;  The bags will arrive laid flat in an outer Carton.  Once you unpack the mailing bags, simply slide or drop your product into the mailing bag.  An easier method might be to remove the bubble lining, drop your item in that and then push it back inside the outer mailer.  The best method for sealing the mailing bag is to then lay it on a flat surface, lip/glue facing up.  Peel off the release tape from the lip which covers the glue and then fold the lip over onto the body of the bag.  We strongly advise that you only fold the lip over to where it naturally wants to fold to and no further.  If you fold the lip right over and seal it, lets say half way down the bag, then there is a chance that the glue will not form a perfect bond and the bags could come open.  We specially treat the mailing bags in the direct area where the lip folds over to as this helps with the bond formed by the glue migrating into the film.

Storage;  We recommend that mailing bags with Permanent Tape are stored at a temperature of 15 - 20 degrees and 50% relative Humidity.  If the ambient temperature falls to less than zero - 5 degrees then you should ensure that you have a means of warming the mailing bags in use.  This because the very cold temperature hardens the glue and so it takes longer to form a bond with the film.

Product Specifications:

Size in mm outer mailer:   250 x 350 + Lip +/- tolerance

Size in inches:  10 x 14 + Lip +/- tolerance

Approx usuable internal area:   235 - 245mm width x 340 - 350mm depth

Opening:   on the 250mm side

Glue:   Permanent Hot Melt x 1 Strip on the lip

Thickness of the Outer Poly Mailers:   50mu/50microns/200 gauge

Qty Per Box/Pack:   100

Outer box size:   500 x 400 x 300mm

Environmental Impact:  These bags are 100% Recyclable and water resistant

Free Sample? -  Sure, just ask.  Telephone 01522 300591, E-mail us direct, use our Get In Touch page, or use Live Chat.